Ball Valve
I AM INTERESTED IN BALL VALVE
Hot rolled solid bar body
26% Higher tensile strength
37% Higher fatigue strength
And produces less waste than a casted product.
cross section 5x larger
Combet floating ball valve seat design
is up to 5X larger than competing trunnion designs.
combet floating
ball valve seat design
Large Ball to Seat interface to evenly distribute torque and to tolerate unprocessed produced fluid media.
Up to 50% reduction
in the size of an API 6D valve
Up to 40% weight
of an API 6D ball valve
multiple bearing surfaces
Used to offset the friction that contributes to over-all valve torque.
Bonnet employs a self lubricating bearing to reduce torque.
Whitford Xylan coating
Valve completely internal and external xylan coated which can extend the life by twice that of traditional valve paints.
Metal-to-metal sealing system
Primary Metal-To-Metal sealing makes Firesafe Design inherent.
Elastomer O-rings are captured in the o-ring grooves
in the Bonnet, Retainer and both sides of the valve.
L-Seal design
allows pressure to pass from the upstream side of the valve and seal bubble-tight on the downstream side of the valve.
Standard Bevel For Weld compact end connections
API / ANSI Crossover Connections
and many other custom
connections are available upon request.
Valve bore sizes
are designed to closely match standard pipe schedules specified by ASME to optimize the valve flow coefficient
Quote request
HEADQUARTER / FACTORY:
COMBET VALVES BV
Bergveste 26
3992 DE Houten
The Netherlands
Tel. +31 (0)30-2006851
Email: info@combet-valves.com
HOUSTON STOCKING SALES REP.:
TWC the Valve Co.
Tel. (281) 566 1200